homestereo

the webs best site for new stereo systems - Find here

8. What is an addressable cable converter-descrambler? This is a converter-descrambler that can be controlled by the cable company from their office location. Through remote coded messages sent via the cable system, the cable company can "address" the customers’ unit to begin descrambling selected premium or pay per view channels. An addressable unit allows the cable company to access your cable box to change the descrambling configuration or program. This function provides the cable company the ability to add or delete descrambling on the channels that come in through your cable line. A non-addressable unit does not provide the cable company access to the cable box program. The program remains stationary and is unchangeable. Both cable box designs have the potential of receiving all channels, none or somewhere in between dependent on the box program.

They will want a satisfied customer who will refer them additional business . The company may not have a quick answer for about 5% of the problems out there. Be patient and work with your cable box company until you find the right Converter box for your area. Sometimes technology changes for your area and the source may need to do some additional research to get the desired image. Do this before the warranty / guarantee has run out. Even then there may be a solution. 12. How can you improve the quality of your cable converter reception? Amplification may be needed to correct the problem . Whenever a cable signal is split between two or more TV’s or routed to some other video components such as VCR’s , the signal weakens and produces a poor quality picture.

We recommend one piece units. It has been our experience that one piece units work better to replace your cable company’s converter than a 2-piece unit. Although 2-piece units tend to be less expensive, they tend to work less efficiently as well. As the saying goes, "You get what you pay for! " Additionally, our 1-piece units cost less than other companies’ 2-piece units. 5. What is a cable converter / descrambler? An electronic tuning device that transposes all available channels from the cable company into either channel 3 or channel 4. A cable converter is simply a "channel changer" that cannot by itself descramble encoded premium channels. It allows you to receive all basic channels if your TV is not the cable ready type.

the webs best site for new stereo systems